Configuring Data Trunk; Figure 16: Pbx->Basic/Call Routes->Data Trunk; Figure 17: Configure Data Trunk - Grandstream Networks UCM6510 How To Configure

5.1. Go to UCM6510 web UI->PBX->Basic/Call Routes->Data Trunk page. Click on
trunk.
5.2. Configure the data trunk in the Data Trunk dialog.
Select the group 2 we created in section
Users will not be able to select the group that has been already used.
5.3. Click on "Save" on the bottom of the dialog.
5.4. Reboot the UCM6510 for the data trunk configuration to take effect.
5.5. Once the UCM6510 boots up, go to UCM6510 web UI->PBX->Basic/Call Routes->Data Trunk page

5. CONFIGURING DATA TRUNK

Figure 16: PBX->Basic/Call Routes->Data Trunk
[2. CONFIGURING T1 CHANNELS]

Figure 17: Configure Data Trunk

How to Configure T1 Trunk on UCM6510
to edit the data
as the channel group.
Page 13 of 17