Door Settings; Lcd Configuration - Grandstream Networks GSC3570 User Manual

10. Access Maintenance ��
11. Enable Open Door icon on LCD

LCD configuration:

1. Tap the menu button if GSC3570 is in idle state.
2. On the first screen menu, tap
3. Press the ADD or + button to add a new GDS.
4. Enter the GDS Name in Device Name field.
5. Select the Account which will have the remote door opening feature and enter GDS SIP extension (or IP address in case of
peering scenario) in Device Number field.
6. Enter the Door Name for Door 1 and Remote PIN to Open Door 1 configured in the GDS in Password Field.
7. Enter the Door Name for Door 2 and Remote PIN to Open Door 2 configured in the GDS in Password Field.
8. Enable Display Open door icon at desktop.
9. At the GSC3570 idle screen, once configured correctly, there will be one or two virtual buttons displayed at lower left corner
of the screen. If one door configured, one button will be displayed; if two doors configured, two buttons will be displayed.
LCD Access ��

Door settings

Figure 12: LCD Access: Door settings
Monitor�� Door System.
Figure 13: External Service: LCD Configuration