Configuring T1 Channels; Figure 4: Configure Digital Hardware Span Type 1; Figure 5: Configure Digital Hardware Span Type 2; Figure 6: Configure Default Group 1 - Grandstream Networks UCM6510 How To Configure

2.1. Go to UCM6510 web UI->PBX->Ports Config->Digital Hardware page. Click on
digital hardware type.
2.2. Select Span Type "T1". And click on "Update" on the bottom of the dialog.
2.3. Go to UCM6510 web UI->PBX->Ports Config->Digital Hardware page. Click on
default group.

2. CONFIGURING T1 CHANNELS

Figure 4: Configure Digital Hardware Span Type 1

Figure 5: Configure Digital Hardware Span Type 2

Figure 6: Configure Default Group 1

How to Configure T1 Trunk on UCM6510
to configure the
to edit the
Page 5 of 17