Xerox Nuvera User Manual page 75

Labels
GBC brand or pre-punched with
rectangular holes: (holes on long
edge). This type of paper only works
when holes are at the rear of the pa-
per tray.
Never Tear Type
Drafting Film
Perforated:
Perforations parallel to feed direction
Perforations perperdicular to the
feed direction
Envelopes (standard medium to large
lettersize)
Tabs
Carbonless
Textured papers, Vellum Bristol pa-
pers
Smooth cover index stock
Table Legend
• SEF: Short Edge Feed
• LEF: Long Edge Feed
• Best: Best system performance
• Good: Good system performance
• Fair: Significant performance degradation is likely, particularly paper handling.
• **: Same performance as shown in
Notes:
1. The output will go to the Top Tray in an MFF-equipped machine, and cannot be stapled.
2. Refer to Table 5 or to the paper tray label for the correct paper loading orientation.
3. Embossed letterhead may cause degraded paper handling, and possibly image deletion defects
near the embossed area on either side of the paper.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
LEF
SEF
LEF
SEF
20 lb. Standard Paper Table
Expected Paper Handling
Refer to note 4 below
Refer to note 2 below
Refer to note 4 below (Load with
holes AWAY from user.)
Refer to note 5 below
Refer to note 5 below
Refer to note 7 below
for the corresponding paper sizes.
10-5