If Dry Ink is spilled or inadvertently gets into the paper path or anywhere else in the machine, the best
course of action is to contact a Xerox Service Representative. They have equipment specifically suited
for dealing with Dry Ink spills.
For details, see
Contacting
Warning
Do not attempt to use a standard shop vacuum or home vacuum to clean Dry Ink. These types of
vacuums are not equipped with correct filtration.
Cleaning the Display
If the control panel display gets dirty or smudged, use this procedure to clean it.
Depending on your work environment, you may need to perform these steps frequently.
To clean the display
Caution
To avoid damage to the machine, do not pour or spray water or cleaner directly into the Xerox Nuvera
. Do not use any abrasive cleaners to clean the Xerox Nuvera .
Recommended cleaning materials:
• Soft, lint-free cleaning towels.
• Xerox Glass Lens and Mirror Cleaner (part # 8R3669) (See
names and
numbers).
1. Dampen a cleaning towel with Xerox Glass Lens and Mirror Cleaner.
2. Gently wipe the display until it is free of dust and smudges.
3. Wipe away any cleaner reside with a clean, dry towel.
Cleaning the 'Optical' Mouse
Dirt and dust settling on the Xerox Nuvera machine can work its way into the mouse, causing the user
difficulty in efficiently navigating the controls on the machine display.
Depending on your work environment, you may need to perform these steps frequently.
To clean the 'optical' mouse
Caution
To avoid damage to the machine, do not pour or spray water or cleaner directly into the Xerox Nuvera
. Do not use any abrasive cleaners to clean the Xerox Nuvera .
1. With a damp lint-free cloth, clean the exterior of the entire mouse. Be sure to clean the four pads on
the bottom of the mouse that come in contact with the surface your mouse travels on.
2. With a damp lint-free cloth, clean the center scrolling wheel. Roll the wheel with your finger to clean
all exposed surfaces.
Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Xerox.
Cleaning Procedures
CRU/Maintenance/Consumables part
17-3