Xerox Nuvera User Manual page 195

Subtopic
FreeFlow Print Manager and job ticket attributes for
custom stock
FreeFlow Print Manager and media size names
Programming custom stock size
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
Hint/Tip Description
Hint to avoid confusion when using the FreeFlow Print
Manager application to specify job ticket attributes for
custom stock. The workaround is from FreeFlow Print
Manager, when you are adding a custom stock, you
should connect to the target printer and in Job Setup,
use the Stock pull down menu (rather than the "Stocks..."
button) and select "New." The window will limit the se-
lection of the stock attributes to those that are settable
for the connected printer. You should be cautious when
using the "Stocks..." button to add new stock. When using
the "Stocks..." button, changes made to non-applicable
attributes will be ignored. This printer only allows the
following media attributes to be specified: Size, Type,
Color, Weight.
When using FreeFlow Print Manager to program a job
with a media size for either of the size names: Spanish
(XE) or Foolscap (XE), the pull-down menu for "Main
Paper Stock" in Job Setup will not contain these size
names.
Workaround: When specifying Paper Type in Job Setup
of FreeFlow Print Manager or Internet Services, the fol-
lowing media sizes do not appear unless the paper is
currently loaded in one of the trays at the printer:
• Spanish (XE)
• Foolscap (XE)
To program one of these sizes, perform the following:
1. Load the paper in one of the trays.
2. From the Main Paper Stock pull-down menu,
choose the Tray with the desired paper stock, or
from the Main Paper Stock pull-down menu, select
New.
3. If you select New, select a size of Custom (.in) from
the New Stock menu.
4. Enter the appropriate dimensions for width and
height:
• Spanish (XE) - 8.46 x 12.4 in.
• Foolscap (XE) - 8.5 x 13.0 inches.
When programming custom stock size, if the stock size
programmed is out of range, the warning message does
not indicate the valid stock size range. Workaround if
possible, program custom stock size at the Nuvera
printer.
How Do I...
14-71