Table of Contents
Advertisement
Machine Specifications
Paper Specifications for the Hole Punch Module
Type
2-punch
3-punch
4-punch
Insertion Tray Capacities
The MFF Insertion Tray specifications are:
• Holds and feeds up to 200 sheets of 20 lb bond (75 gsm), all same stock size
• Accepts media weight of 52 - 220 gsm
• Accepts sizes of 176-470 mm (6.93 - 18.5 in) length and 176-298 mm (6.93 x 11.73 in) width
For more information about loading special stock such as tabs, refer to
Finishing
Output.
Configurations
The MFF is the basic configuration on the Xerox Nuvera EA Production System and is the only
configuration that does not include the Sheet Enhancement Module (SEM). The Sheet Enhancement
Module is a standard component on systems with a BFM or DS3500/XPS.
The diagrams below show the MFF finishing configuration options.
Figure 26: Print Engine / MFF Professional (can include an SFM Insertion Module)
Figure 27: Print Engine / MFF Pro Plus (can include an SFM Insertion Module)
21-16
Size
171-321mm (6.74-12.63 in) width
148-457mm (5.83-17.99 in) length
232-321mm (9.14-12.63 in) width
148-457mm (5.83-17.99 in) length
255-321mm (10.04-12.63 in) width
148-457mm (5.83-17.99 in) length
Weight
52-200 gsm
52-200 gsm
52-200 gsm
Loading Special Stock for Proper
Xerox
User Guide and Training Aid (UGTA)
®
Nuvera
®
Advertisement
Table of Contents
