Table of Contents
Advertisement
Printing a job using the DocuSP web interface
Specifying a page range for printing
Specifying the main stock for the job
4-8
Guide to Printing Using Xerox Production Print Services
To specify a range of pages that will be printed, follow these
steps:
1. On the Job Submission window, scroll until the [Quantity] field
is visible.
2. Do one of the following:
•
Select the [All] radio button if you want to print all the
pages in the document.
•
Select the [From/To] radio button if you want to specify a
range of pages to print. The default range of pages is 1 -
99999.
In the [From] field, enter the first page number that you
want to print; and in the [To] field, enter the last page
number. The [All] radio button must be deselected before
you can enter numbers in these fields.
NOTE: The value in the [From] field must be less than or
equal to the value in the [To] field.
The main stock is the stock on which most of the job is printed.
Follow these steps to specify a stock that will be used for all
pages in the job that are not programmed to use one of the other
available stocks.
The Main Paper Stock pull-down menu contains all stocks that
have been designated on the stocks window as Favorites.
Follow these steps to select the main stock for your job:
1. From the Main Paper Stock pull-down menu, select the stock
on which you want to print the job. The properties of the stock
that you select are displayed in the features box below the
menu.
NOTE: Unless you specifically want to print a smaller image
on a larger sheet of paper, or a larger image on a smaller
sheet of paper, ensure that the paper size that is specified in
the application matches the paper size in the job ticket.
2. If the desired stock does not appear on the menu, select the
[Stocks...] button next to the Main Paper Stock menu to
display a list of all stocks that have been enabled for your
printer.
Advertisement
Table of Contents
