Enabling Lcds Printing: Overview; Verifying The Presence Of The Lcds And The Productivity Pack Licenses - Xerox Nuvera User Manual

LCDS printers offer the ability to control the format of the final product, the printed page, from outside
the application generating the variable data. This separation of function between the data generating
application and the printer has always been a common practice in the high performance range of
computer printers. The data may be in its proper position but post processing steps between the
application and the printer produces the final page appearance. The simplest way to visualize this type
of printing is to think of preprinted forms where the printer prints variable information into blank areas
of the form.
LCDS resources can be loaded via tape, CD, USB, or over the network. A floppy drive is not avaiable.
Note
When using the LCDS application, the Xerox Nuvera System will not retrieve paper from the Insertion
Module.
Note
Edge marking is not supported.

Enabling LCDS Printing: Overview

To use LCDS printing, the Operator or System Administrator needs to make sure that the following
conditions are met:
• the Productivity Pack license must be installed and enabled.
• the LCDS license must be installed and enabled.
• files containing the appropriate processing commands (see the "forms" analogy above) have been
loaded on the system
• supporting resources (such as forms and fonts) are installed on the system
• the correct license is installed on the system
• one specific queue has been created and dedicated
The selection and setting of additional queue parameters, available under the various tabs of the Queue
Properties... dialog, in association with the resources installed on the system under LCDS Resources,
determines how LCDS jobs are processed at the printer.
For more information about queues, see

Verifying the presence of the LCDS and the Productivity Pack Licenses

To print LCDS jobs, you must verify that the LCDS license is installed and enabled on the system. You
must also have the Productivity Pack license enabled for the stock library to be available as well as all
valid halftone screens.
Viewing LCDS Resources
To support LCDS, files containing the appropriate processing commands and supporting resources (such
as forms and fonts) must be installed on the system under LCDS Resources. To view the currently-installed
LCDS resources, perform the following steps:
1. Log on to the system by selecting Logon from the Logon menu.
2. Select Operator (or System Administrator) as the user from the User pull-down menu.
3. Enter the Operator (or System Administrator) password and click <OK>.
4. Select Administration > LCDS Resources.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
on the system to process LCDS (streaming) jobs
Working with Queues.
How Do I...
14-55