Europe Eu; Operational Safety - Xerox Nuvera User Manual

Warning
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous exposure of laser light.
Since radiation emitted inside this product is completely confined within the protective housing and
external covers, the laser beam cannot escape from the machine during any phase of the user operation.
This product contains laser-warning labels. These labels are intended for use by the Xerox Service
Representative and are placed on or near panels or shields that require special tools for removal. Do not
remove any of the panels. There are no operator serviceable areas in these covers.

Europe EU

This product complies with IEC's safety standard 60825-1: 2007 (2
The equipment complies with laser product performance standards set by governmental, national, and
international agencies as a Class 1 Laser Product. It does not emit hazardous radiation, as the beam is
totally enclosed during all phases of customer operation and maintenance.
Warning
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This product contains laser-warning labels. These labels are intended for use by the Xerox Service
Representative and are placed on or near panels or shields that require special tools for removal. Do not
remove any of the panels. There are no operator serviceable areas inside these covers.
If you need additional safety information concerning the product or Xerox supplied materials, you may
call the following number:
+44 (0) 1707 353434

Operational Safety

Your Xerox equipment and supplies were designed and tested to meet strict safety requirements. These
include safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines will help ensure the continued safe operation of your
Xerox Nuvera Printer:
• Use the materials and supplies specifically designed for your Xerox Nuvera Printer. The use of
unsuitable materials may result in poor performance of the machine and possibly a hazardous
situation.
• Follow all warnings and instructions that are marked on or supplied with the machine.
• Place the machine in a room that provides adequate space for ventilation and servicing.
• Place the machine on a level, solid surface (not on a thick pile carpet) that has adequate strength to
support the weight of the machine.
• Do not attempt to move the machine. A leveling device that was lowered when your machine was
installed may damage the carpet or floor.
Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
Safety and Certifications
nd
Edition).
3-7