Related Information - Xerox Nuvera User Manual

Machine Specifications
Paper Type
Window stock
Preprinted materials
DocuCards
Paper backed transparencies
Mixed size sheet handling in Docu-
ment Feeder and Multifunction Fin-
isher

Related Information

• Supported Paper
• Expected Paper Performance Tables
• Configuring Paper Stocks and Trays
• Adding Pages To A Document
21-6
Usage Recommendation
• Type: Open flap.
• Loading orientation: Address side up and and flap oriented towards
operator.
• Output to MFF top tray only
• Loading capacity limit - 60
Do Not Use.
• Design the preprinted image so that no ink, varnish, or aqueous coating
is placed in the area to be printed. Toner adhesion can not be assured
when printing over inks or varnish. If the image must be printed over
pre-printed ink, results are more likely to be acceptable if the color is
screened back to less than 30% or the base stock is uncoated paper
• Select papers printed with laser-compatible, lithographic inks to minimize
offsetting. UV-cured inks are recommended, especially on coated stocks,
to insure complete drying before printing on a Xerox Nuvera. Laser inks
can be oxidative, or heat set types.
• Do not use papers preprinted with xerographic processes.
• Select preprinted sheets that are free of excessive curl.
• Select base paper stock approved for use on a Xerox Nuvera system.
• Refer to the Xerox Nuvera Production Paper Guide for more Information.
• DocuCard sheet with a single card
• LEF for 8 x 11" and A4
• SEF for 11 x 17"
• Loading capacity 50 sheets
• If using a Tiltatron, capacity is 200 sheets in trays 1 and 2.
Loaded with side to be imaged facing up, and glued end to the left.
Requires the same IB/OB dimension for all sheets.
Xerox ® Nuvera
User Guide and Training Aid (UGTA)
®