Printing Pads; To Print A Pad - Xerox Nuvera User Manual

Hide thumbs Also See for Nuvera:
Table of Contents

Advertisement

How Do I...
Subtopic
Landscape duplex options reversed
For more information on printing from a client application, see
For detailed information about the controls used in these workflows, see the Xerox Nuvera online Help
system.

Printing Pads

You have the ability to produce printed pads on all Xerox Nuvera systems. Pads are typically single sheet
forms, often with a card stock back cover and a glued binding on the top edge. Each sheet can be torn
off the pad as needed.
Keep the following points in mind when considering pad printing:
• A pad printing job can only have one page image if printed one-sided, or two page images if printed
duplex.
• If the finisher supports the required options, a pad printing job can be offset and finished after each
pad subset.
• Pad printing jobs can be saved, reprinted, and forwarded.
Note
Combining pad printing with Special Pages or Slip Sheets is not recommended since it may produce
unexpected results.

To print a pad

You can program pads in various ways including Copy, Print from File, Job Properties, and Queue defaults.
The following instructions pertain only to the local user interface.
1. Double-click the pad job.
2. Select the Output tab.
14-14
Hint/Tip Description
1.
In the Nuvera Print Driver, select the Paper/Output
tab.
2.
Set Paper Size to size of the job (8.5x11).
3.
Select booklet fold if it applies to your job.
4.
Select the Image Options tab.
5.
Set the Margins to None.
6.
Select the Layout/Watermark tab.
7.
Set Page Layout to Booklet Layout.
8.
Select Fit to New Paper Size and set the output
paper size to 11x17.
When printing a landscape document using the PCL
driver, select the opposite duplexing option from the
one you want. 2 Sided Print and 2 Sided Print, Flip on
Short Edge are reversed. This also breaks Booklet Layout
for landscape jobs. So to print a booklet using a land-
scape job, send the job to the FreeFlow Print Server and
hold it. Program the Booklet Layout in the job properties
and release it.
Printing a Job from your Networked
User Guide and Training Aid (UGTA)
PC.
Xerox
®
Nuvera
®

Advertisement

Table of Contents
loading

Table of Contents