Cleaning The Q1164 Sensor; Cleaning The Display - Xerox DocuPrint 100 Operator's Manual

Maintaining the system

Cleaning the display

4-26

Cleaning the Q1164 sensor

To access sensor Q1164, open the top cover of the last feeder/
stacker module (the one containing the purge tray).
To clean the sensor:
1. Brush or wipe the sensor window lightly.
2. Remove any paper dust present in the area.
The display should be cleaned as required.
Clean the display with a soft, lint-free cloth dampened with a
glass or lens and mirror cleaner. Do not spray the liquid directly
onto the display because it may cause damage.
Operator Guide