Printing Overview - Xerox VersaLink C7000 User Manual

Printing

Printing Overview

Before you print, ensure that your computer and the printer are plugged in, powered on, and
connected to an active network. Ensure that you have the correct print driver software installed on
your computer. For details, refer to
This printer has PCL enabled by default. To use PostScript, purchase and install the feature. For details,
contact your local Xerox representative.
Note:
• Not all options described are supported on all printers. Some options apply only to a specific
printer model, configuration, operating system, print driver type.
• The Windows PostScript print driver and the Macintosh print driver provide the widest range
of features.
To send a job to the printer:
1. Select the appropriate paper.
2. Load paper in the appropriate tray. At the printer control panel, specify the paper size, color, and
type.
3. Access the print settings in your software application. For most software applications, press CTRL
+P for Windows, or CMD+P for Macintosh.
4. Select your printer.
5. To access the print driver settings, for Windows, select Printer Properties, Print Options, or
Preferences. For Macintosh, select Xerox Features. The title of the button can vary depending on
your application.
6. Modify the print driver settings as necessary, then click OK.
7. To send the job to the printer, click Print.
To print a file stored on a USB Flash drive, refer to
78 Xerox ® VersaLink
User Guide
Installing the
® C7000 Color Printer
Software.
Printing from a USB Flash Drive.