Table of Contents
Advertisement
5.1 AMI BIOS Setup Program
All relevant information for operating the board and connected peripherals is stored in the CMOS
memory backed-up by a supercap or in the main BIOS flash. The later if the default configuration.
5.1.1
Accessing the BIOS Setup Utility
The system BIOS (Basic Input Output System) provides an interface between the operating system
and the hardware of the AT8001 SBC. It uses the AMI Setup program, a setup utility in flash memory
that is accessed by pressing the <DELETE> key at the appropriate time during system boot. This
utility is used to set configuration data in CMOS RAM.
To run the AMI Setup program incorporated in the ROM BIOS:
•
Turn on or reboot the system.
•
When you get the following messages, hit <DELETE> key (or F4 on Remote Keyboard) to
enter SETUP.
AMIBIOS(C)2003 American Megatrends, Inc.
KONTRON AT8001 BIOS Version 0.18
CPU : Intel(R) Xeon(TM) CPU 2.80GHz
Speed : 2.80 GHz
Press DEL to run Setup (F4 on Remote Keyboard)
Press F11 for BBS POPUP (F3 on Remote Keyboard)
(C) American Megatrends, Inc.
5-1
AT8001 User's Guide
Advertisement
Table of Contents
