Revision Protocol - CPI CLS Advance Operator's Manual

CLS Advance
2

Revision Protocol

Version Revision
_1-0 First official version
• Applied terminology of "CLS Control System Specification"
• Added references to other CLS documentation
_1-1
• Added reference to useful CLS integration tools
• Cleaning CLS
• Elimination of hopper coin jam
_1-2 • Added coin-in – coin-out height
• Corrected power connector pinning
• Scope of delivery changed
_1-3
• New service dimensions under coin return cup
• Corrected payout capacity values
• Added how to fill a hopper directly
• Added how to empty a hopper manually
• Added the Fast Payout option
_1-4
• Modified coin input funnel
• Updated status and error messages
Added how to remove coin input funnel insert
_1-5
_1-6 Update to CLS Advance
Update to fast payput information and label
_1-7
• Updated model number
_1-8 • Updated status and error messages
• Adapted layout
OM_CLS_-_EN_2-0
Chapters/sections concerned
• All
• 3.1.2 "Additional useful technical documenta-
tion"
• 3.3.1 "Scope of delivery"
• 6.4 "Putting the CLS into service"
• 8.4 "Cleaning the CLS"
• 8.5 "Eliminating coin jam-up"
• 9.1 "Device data"
• 9.3 "Installation & service dimensions"
• 9.2.2 "Power connector"
• 3.2 "About the CLS coin recycling system"
• 6 "Getting started"
• 6.1 "Selecting an installation site"
• 9.3 "Installation & Service dimensions"
• 5.10.1 "Payout configuration & capacity"
• 8.1 "Filling the coin hoppers"
• 8.2 "Emptying the coin hoppers"
• 5.2.1 "Model number decoding"
• 5.2.2 "Configuration number decoding"
• 5.10.2 "Fast Payout option"
• All figures showing the coin input funnel
• 8.4 "Cleaning the CLS"
• 10.2.2 "Troubleshooting tables"
• 8.3 " Removing and reinserting funnel insert"
• 8.4 "Cleaning the CLS"
• 5.2 Product label
• 5.10.2 Fast payout
• 5.2.1 "Model number decoding"
• 10.2.2 "Troubleshooting tables"
• All
Version Revision
Enhanced notes on requirements of a customer-side power
supply unit
_1-9
_2-0 Added product reliability figures
Revision Protocol
Chapters/sections concerned
• 3.2.3 "Necessary accessories"
• 4.2 "Protecting persons and equipment"
• 6 "Getting started"
• 9 "Technical Characteristics"
9 "Technical Characteristics"
5