CPI CLS Advance Operator's Manual page 43

CLS Advance
9.4 Power supply requirements
We recommend you use the CPI power supply (order no. 42733) to connect the CLS.
In case you prefer an alternative unit plase make sure, that the CLS has to be connected through
an appropriate power supply guaranteeing the CLS is grounded to the mains and meeting the
following requirements:
• 100–240 V AC
• Output: 24 V DC
• Cabling
100–240 V AC
Power supply
If the power supply does not meet these requirements, the CLS is not protected
against electromagnetic interferences and damage, and proper operation can-
not be ensured.
Regulations for grounding systems vary considerably among countries. Please
consider all relevant and applicable local regulations and directives.
OM_CLS_-_EN_2-0
GND
24V DC
Ground connection
Technical characteristics
43