Coin Rejector Pin; Acceptance, Sorting & Payout Control; Fig. 15: Detail: Rejector Pin, Coin Return Conveyor And Tray - CPI CLS Advance Operator's Manual

CLS Advance
5.11

Coin rejector pin

Coins with measured values beyond the programmed acceptance band are extracted by means of
the coin rejector pin [Fig. 15/1] coming up and deflecting these coins to the return belt [Fig. 15/2]
transporting them to the coin return tray [Fig. 15/3].
If too many coins have to be rejected and directed to the coin return tray and the
tray is full of coins, the upper status illumination will flash red. No further coin
should be inserted until the coin return tray has been emptied.
5.12 Acceptance, sorting & payout control
To ensure that accepted coins actually arrive in the coin hoppers and that acceptance
has not been tampered with, sensors check whether the inserted coins pass unhin-
dered through the CLS and into the coin hoppers or coin return tray
. Only when the coins have passed these checking devices,
path & Sensor monitoring", p. 19)
either coin acceptance and payout or, in case of tampering or malfunction, an error
code is transmitted to the control unit.
OM_CLS_-_EN_2-0
(cf. Chap. "5.15 Coin

Fig. 15: Detail: Rejector pin, coin return conveyor and tray

Design & Function
17