Fig. 28: Bayonet Mount Properly Closed; Fig. 29: Coin Validator Arm Lifted - CPI CLS Advance Operator's Manual

CLS Advance
7.3 Opening and closing the coin acceptance unit
The coin acceptance unit consists of an upper and a lower layer. The upper layer can be opened using
a bayonet mount to eliminate a jam for instance The bayonet mount indication is green [Fig. 28/1]
when it is properly closed. To disconnect the mount:
1
Open the lid
(cf. Chap. "7.2 Opening and closing the CLS lid", p. 26)
2
Carefully lift the arm [Fig. 29/2] of the coin validator.
3
Press the green lever [Fig. 30/3] of the bayonet mount.
4
Keep the lever pressed and turn bayonet mount [Fig. 30/4] counter-clockwise as far as it
will go.
The bayonet mount indication is no longer green but red [Fig. 31/5].
5
Open up upper acceptance unit as far as it will go.
Close in reverse order and make sure that bayonet mount indication is green again.

Fig. 28: Bayonet mount properly closed

OM_CLS_-_EN_2-0
.

Fig. 29: Coin validator arm lifted

Operation
27