CLS Advance
8.4.2
Emptying the dust tray
1
Open the CLS lid
(cf. Chap. "7.2 Opening and closing the CLS lid", p. 26)
2
Lift the clip [Fig. 45] and
3
carefully fold down and unhinge the tray [Fig. 46].
Make sure that dust or foreign objects do not fall into the CLS when emptying
and cleaning the dust tray. In case of doubt just use a cloth to cover the coin
acceptance unit.
4
Empty the tray and wipe it out, if necessary.
5
Hinge the tray again.
6
Close the tray and snap it into the clip.
7
Close the lid again
(cf. Chap. "7.2 Opening and closing the CLS lid", p. 26)
OM_CLS_-_EN_2-0
.
.
Fig. 45: Lifting the clip and folding down the dust tray for cleaning
Fig. 46: Unhinging the dust tray for cleaning
Service
37