CLS Advance
CLS ADVANCE CONFIGURATION NUMBER DECODING
5.2.2
Configuration number decoding
0000000000/0000/000
MS14
CLS-FRM-141002-0009
CLS-ADV/FLST0A-EUR00-C1-1
CLS-CFG-EUR00-F0S00A-0004
CLS-CFG-XXXxx-XXSXXA-xxxx
Currency –
Confi guration fi le
Product name
5.3
Interfaces
For details of the USB PC and power interfaces [Fig. 8/1, 2] please refer to
Crane Payment Innovations GmbH • Zum Fruchthof 6 • D-21614 Buxtehude • Tel.: +49 (0) 41 61-729-0 • Fax: +49 (0) 41 61-729-115 • E-mail: info@cranepi.com • www.cranepi.com
5.4
On-off switch
The coin recycler is switched on and off using the on-off (power) switch [Fig. 8/3] on the rear of
the device. When switching on the CLS, the device is ready for initialization and operation (upper
illumination [Fig. 8/4] is green for two seconds). Following the initialization process and self test
activated by the customer's control software, the green illumination [Fig. 8/4] (now steadily on)
indicates coins may be deposited and change can be paid out. To entirely disconnect the device
from supply, the switch must be set to its lower position to OFF.
OM_CLS_-_EN_2-0
M616
CLS-CFG-EUR00-F0S00A-0004
Revision
= caliber programming
A
Programming –
0
= not applied
Further function –
= no extra
0
Further hardware extras –
S
Security –
= standard
0
= not applied
Further function –
0
= without,
F
= with
Fast payout –
xx
= consecutive number 01, 02 etc.
Variant –
= 3-digit ISO 4217 currency code (EUR = euro, USD = US dollar)
XXX
Chap. "9.3 Interfaces", p. 42
Equipment
Coin processing
.
Fig. 8: Detail: Interfaces, on-off switch and upper status illumination
Design & Function
11.19 CHo/Roe
K_CLS_EN_0-7
13