Coin Validator And Sorting Spiral; Fig. 19: Centrifuge, Coin Validator Providing Several Measurement Sensors, Coin Rejector Pin - CPI CLS Advance Operator's Manual

Design & Function
5.15.2 Coin validator and sort-
ing spiral
1 Lever
measures coin diameter
2 Coil
measures coin material
properties,
detects coin type,
signals accepted coin
(with valid measured
values) and
increases appropriate
hopper counter
3 Sensors
measure coin rim and
thickness
4 -
5 Coin rejector pin
coming up to extract
(red) coins with mea-
sured values beyond the
programmed acceptance
band and deflecting these
coins to the return belt
& tray
6 Coin sorting spiral
directs accepted (green)
coins into the sorting
chutes according to their
diameters
20

Fig. 19: Centrifuge, coin validator providing several measurement sensors, coin rejector pin

and sorting spiral
CLS Advance
OM_CLS_-_EN_2-0