Fig. 50: Removing Hopper Bowl And Payout Disk; Fig. 51: Reinstalling Hopper Bowl - CPI CLS Advance Operator's Manual

Service
If that does not work as expected:
7
Remove the hopper bowl by pressing the locking latch on both sides and detach the
bowl [Fig. 50].
8
Extract the payout disc [Fig. 50] and keep it in safe place for reassembly.
9
Remove all coins jammed.
10
Reinsert payout disc.
11
Insert the mounting studs of the hopper base into the guides of the bowl and let engage
locking latches [Fig. 51].
12
Reinstall hopper
(cf. Chap. "7.5 Removing and reinstalling a coin hopper", p. 30)
40
and refill all removed coins.

Fig. 50: Removing hopper bowl and payout disk

Fig. 51: Reinstalling hopper bowl

CLS Advance
OM_CLS_-_EN_2-0