CLS Advance
7
Operation
This chapter describes how to operate the coin recycler:
• Switching the CLS on/off
• Opening and closing the CLS lid
• Opening and closing the coin acceptance unit
• Opening and closing the coin payout unit
• Removing and reinstalling a coin hopper
7.1
Switching the CLS on/off
The CLS is switched on and off with the power switch on the rear of the device [Fig. 25/1]:
1
Press the on-off switch at the top to switch the CLS on.
If already connected to power and initialized by the control unit computer, the upper illumina-
tion [Fig. 25/2] is green and the CLS is ready to operate.
2
Press the on-off switch at the bottom to switch the CLS off.
Details for how to behave in case of disconnection from supply are listed in
Chap. "4.3 Disconnection from supply", p. 7
OM_CLS_-_EN_2-0
.
ON
OFF
Fig. 25: Switching CLS on/off
Operation
25