CPI CLS Advance Operator's Manual page 42

Technical characteristics
Device dimensions Height:
Width:
Depth:
Coin-in – coin-out distance: 248 mm (ADA-compliant)
For exact installation dimensions please refer to
dimensions", p. 44
Device weight 14.5 kg (without coins)
Mounting position Horizontal, max. deviation: ± 2°
Directives applied EMC:
(cf. Declaration of Conformity)
Coin-in – coin-out distance is ADA-compliant
Certification marks CE/UL
9.2 Reliability figures
9.2.1 Failure rates
Performance increases with decreased coin feeding speed. The following failure rates are valid for
a coin feeding speed of up to 10 coins per second:
Average accountancy error rate
Average operator call error rate
Average service call error rate
9.2.2 Replacement intervals
The below figures are average values based on millions of tested transactions under various circum-
stances and with different currencies. Due to a high-frequent use of coins with specific properties,
such as very sharp and thin edges or rims of polygonal coins, the lifetime figures can vary.
Replace part every ... coin cycles
CLS Advance part
(please contact service partner)
Coin barrier/curtain
Transport belt motor
Bearing & belt
Centrifuge
Coin validator
Sorting spiral
* MCBIF = Mean Cycle Between Intrinsic Failure
42
250 mm
300 mm
485 mm (including coin return tray)
420 mm (without coin return tray)
Chap. "9.5 Installation & service
2014/30/EU
EN 55 014-2 (interference resistance)
EN 55 032 Class B (interference emission)
1:10,000 (wrong sorting, counters)
1:50,000 (store staff measures such as clearing jams)
1:500,000 (service staff measures such as replacing parts)
MCBIF* Replacement(s) per lifetime
500,000 500,000 8
3,000,000 1,500,000 1
2,000,000 1,500,000 1
1,500,000 1,500,000 2
2,000,000 2,000,000 1
2,000,000 2,000,000 1
9.3 Interfaces
This section shows the pin assignment for the CLS interfaces to the PC and the power supply unit.
9.3.1 USB port
USB standard B
9.3.1.1 Pinning
Pin Function Description
1 VCC +5V
2 D- Data-
3 D+ Data+
4 GND Ground
9.3.2 Power connector
• Type: KPJX-4S-S, socket, shielded
• Manufacturer: Kycon
9.3.2.1 Pinning
Pin Function
1 24 V DC
2 GND
3 GND
4 24 V DC
5 Chassis ground
CLS Advance
1 2
4 3
2 1
3 4
5
OM_CLS_-_EN_2-0