Attaching Hydraulic And Electrical Components: M200 Windrowers - MacDon R85 Operator's Manual

18. Move the windrower
CLOSED position.
windrower operator's manual.

3.7.6 Attaching Hydraulic and Electrical Components: M200 Windrowers

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
Refer to
3.7 Attaching the Header, page 41
to the following procedures for electrical and hydraulic connections:
To operate the 16-foot header on an M200 windrower,
installation of a motor/hose kit (MD #B5455) is required.
If required, obtain the kit through your MacDon Dealer.
Install kit in accordance with the supplied instructions.
214014
platform (A) to
For instructions, refer to the
for procedure to mechanically attach the header to the windrower. Refer
OPERATION
the
Figure 3.62: Windrower with LH Platform in
Closed Position
Figure 3.63: MD #B5455 Hydraulic Drive Kit
60
Revision B