Transporting The Header - MacDon R85 Operator's Manual

3.11 Transporting the Header

For information on transporting the header when attached to the windrower, refer to your windrower operator's
manual.
IMPORTANT:
For cab-forward road travel the windrower must have the lighting and marking bundle installed (MD #B5412).
IMPORTANT:
Lights are factory assembled to meet road travel lighting requirements with windrower in ENGINE-FORWARD
transport mode. If transporting header with header forward, light assemblies MUST be reversed.
Ensure the reflector assemblies are properly orientated
to suit the mode of transporting the header. The amber
deflector MUST face the direction of travel.
For procedure on changing the reflector orientation, refer
to
3.12 Adjusting the Transport Lights, page
214014
OPERATION
82.
Figure 3.102: Windrower Direction
A - Engine-Forward
C - Amber Light
81
B - Cab-Forward
Revision B