Lubrication And Servicing Intervals - MacDon R85 Operator's Manual

The greasing points are marked on the machine by
decals showing a grease gun and grease interval in hours
of operation.
Use the recommended lubricants specified in this manual.
Refer to
5.2 Recommended Fluids and Lubricants, page
120.
1. Wipe grease fitting with a clean cloth to avoid injecting
dirt and grit.
2. Inject grease through fitting with grease gun until
grease overflows fitting, except where noted.
3. Leave excess grease on fitting to keep out dirt.
4. Replace any loose or broken fittings immediately.
5. If fitting will not take grease, remove and clean
thoroughly. Also, clean lubricant passageway.
Replace fitting, if necessary.

5.3.6 Lubrication and Servicing Intervals

To identify the various locations that require lubrication and servicing, refer to the following illustrations (organized
by the frequency of service that is required).
214014
MAINTENANCE AND SERVICING
126
Figure 5.2: Grease Interval Decal
Revision B