3.7 Attaching the Header
3.7.1 Attaching the Forming Shield
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
1. Stop the engine and remove the key.
2. Remove the two clevis pins (A) from the forming shield
forward end.
3. Position
the
forming
windrower frame.
214014
OPERATION
shield
(A)
under
the
Figure 3.22: Forming Shield
Figure 3.23: Forming Shield under
Windrower Frame
41
Revision B