Recommended Fluids And Lubricants - MacDon R85 Operator's Manual

5.2 Recommended Fluids and Lubricants

Your machine can operate at top efficiency only if clean lubricants are used.
• Use clean containers to handle all lubricants.
• Store in an area protected from dust, moisture, and other contaminants.
Table 5.1 Fluids and Capacities
Lubricant Location
As required
unless otherwise
specified
Grease
Driveline
slip-joints
Cutterbar
Gear Lubricant
Conditioner
gearbox
Bevel gearbox
214014
MAINTENANCE AND SERVICING
Description
SAE Multi-Purpose, High temperature extreme
pressure (EP) performance with 0–1% max.
Molybdenum Disulphide (NLGI Grade 2) Lithium
complex base
High temperature extreme pressure (EP) performance
with 10% max. Molybdenum Disulphide (NLGI
Grade 2) Lithium base
80W-90 gear lubricant with high thermal and oxidation
stability conforming to API gear lubricant service GL-5
minimum (SAE J2360 preferred) specifications such
as Traxon 80W-90 gear oil
75W-90 synthetic gear lubricant with high thermal and
oxidation stability conforming to API GL-5 minimum
(SAE J2360 preferred) specifications such as Traxon
E Synthetic 75W-90 gear oil
120
Capacities
—
—
4.25 L
(4.4 US quarts)
750 ml
(0.79 US quarts)
2.1 L
(2.2 US quarts)
Revision B