Connecting Header Hydraulics Using Hard Plumbing: M1240 Windrowers - MacDon R85 Operator's Manual

3. Move the left-hand windrower platform (A) to the
CLOSED position.
windrower operation's manual.

Connecting Header Hydraulics Using Hard Plumbing: M1240 Windrowers

Hard plumbing helps reduce the potential for leaks at the hydraulic connection sites and helps the header drive
run more efficiently. To connect the M1240 Self-Propelled Windrower to the R85 Header with hard plumbing,
follow these steps.
1. Remove protective plugs (A) from ends of hydraulic
hoses.
214014
For instructions, refer to the
OPERATION
Figure 3.48: Windrower with LH Platform in
Closed Position
Figure 3.49: Protective Shipping Plugs on R85
Hydraulic Hoses (Windrower Not Shown for
Clarity)
53
Revision B