Detaching The Header; Detaching The Header: M205 Windrowers - MacDon R85 Operator's Manual

3.8 Detaching the Header

3.8.1 Detaching the Header: M205 Windrowers

Refer to your windrower operator's manual for procedure to mechanically detach the header from a windrower. Refer
to the following procedure to disconnect electrical and hydraulic systems:
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator's seat for any reason.
1. Lower header to ground. If ground is soft, place blocks
under header.
2. Stop the engine and remove the key.
3. Move the left side (cab-forward) platform (A) to the
open position. For instructions, refer to the windrower
operator's manual.
214014
OPERATION
Figure 3.76: Windrower LH Platform
67
Revision B