Closing The Cutterbar Doors: North American Header - MacDon R85 Operator's Manual

3.5.2 Closing the Cutterbar Doors: North American Header

Follow these steps to close the cutterbar doors on a North American header:
CAUTION
To avoid injury, keep hands and fingers away from corners of doors when closing.
1. Holding the door open, lift the safety door latch (A)
to disengage its lock, then move the door down to its
closed position over the cutterbar.
2. Hook curtain latches (A).
NOTE:
Ensure that curtains hang properly and
completely enclose cutterbar area.
214014
OPERATION
Figure 3.14: Cutterbar Doors
Figure 3.15: Curtain Latches
35
Revision B