Technical Data - Fronius TransTig 2200 Operating Instructions Manual

Technical data

Special voltages
TT 2200, MW
1700, MW 2200
Mains voltage 50-60 Hz
Mains voltage tolerance
Mains fuse protection (slow-blow) 16 A
Primary contin. power (100% d.c.) 3.0 kVA
Cos phi
Welding current range
Welding current at:
Open-circuit voltage
Working voltage:
Degree of protection
Type of cooling
Insulation class
Dimensions L x W x H mm
(with handle)
Weight (without handle)
Weight (with handle)
Marks of conformity
Note! Incorrectly dimensioned mains plugs, mains supply leads and fuse
protection can lead to serious damage to (or loss of) property. If the power
source is designed to run on a special voltage, the Technical Data shown on
the rating plate apply. The mains plug and mains supply lead, and their fuse
protection, must be dimensioned accordingly.
TIG
Rod electrode (MMA)
10 min/25°C 40% d.c.
10 min/25°C 50% d.c.
10 min/25°C 60% d.c.
10 min/25°C 100% d.c.
10 min/40°C 35% d.c.
10 min/40°C 40% d.c.
10 min/40°C 60% d.c.
10 min/40°C 100% d.c.
TIG
Rod electrode (MMA)
inches
TT 2200 MW 1700
230 V 230 V
-30% / +15% -20% / +15%
16 A
3.3 kVA
0.99 0.99
3 - 220 A 3 - 170 A
10 - 180 A 10 - 140 A
- 170 A
220 A -
200 A 140 A
170 A 110 A
- 170 A
220 A -
180 A 130 A
150 A 100 A
84 V 88 V
10.1 - 18.8 V 10 - 16.8 V
20.4 - 27.2 V 20.4 - 25.6 V
IP 23 IP 23
AF AF
B B
485x180x390 485x180x344
19.1x7.1x15.4'' 19.1x7.1x13.54''
16,4 kg 13.6 kg
37 lb. 30.8 lb.
16.8 kg 15 kg
37 lb. 33 lb.
S, CE S, CE
75
MW 2200
230 V
-30% / +15%
16 A
3.7 kVA
0.99
3 - 220 A
10 - 180 A
220 A
-
180 A
150 A
220 A
-
170 A
150 A
88 V
10.1 - 18.8 V
20.4 - 27.2 V
IP 23
AF
B
485x180x390
19.1x7.1x15.4''
17.4 kg
38.3 lb.
17.8 kg
39.2 lb.
S, CE