Standard Mode - ICP DAS USA I-8014W User Manual

Standard mode

It converts one data from one channel at every sampling occasion.
For example, if the Ch0, Ch1and Ch2 are configured into the scan function, and
sampling rate is set as 1 kHz, the time period between every sampling operation is 1
ms, and scan one cycle (from Ch0 to Ch1 to Ch2) needs 3ms as below:
I-8014W API User Manual, v 1.0.1, September 2011 E-mail: service@icpdas.com
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved.
37