Internal Hardware Trigger Method - ICP DAS USA I-8014W User Manual

Internal hardware trigger method

If you would like to synchronously start the Magic Scan function on two or more
modules, you can set the trigger source as the internal hardware signal in program,
and the internal trigger signal will trigger the Magic Scan operation almost at the
same time for the several modules.
Trigger the Magic Scan for each module by internal
hardware signal.
I-8014W API User Manual, v1.0.1, June 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
40