ICP DAS USA I-8014W User Manual page 27

Step3. Plug the I-8014W into the slot of control unit and turn on the controller.
Step4. Launch pac_i8014W_BasicInfo.exe on controller, and verify the basic
information and AI read from each channel as follows:
Tips & Warnings
Unused channel should be connected to GND to avoid floating.
I-8014W API User Manual, v 1.0.1, September 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved.
Library and FPGA version information
Single-ended/ differential jumper position
Gain value is around 33000, when it
is far from 33000 means that the
value is incorrect.
Verify the AI data from each channel.
E-mail: service@icpdas.com
27