ICP DAS USA I-8014W User Manual page 15

Step 1. Refer to Jumper setting, page
select jumper is in differential position.
Step 2. Connect your stable signal source (ex. a battery output) to I-8014W by
differential wiring as below.
Step 3. Connect the power supply to the unit, and connect the control unit and PC by
RS232 cable.
POWER SUPPLY
+10V~30VDC
HOST COMPUTER
I-8014W API User Manual, v 1.0.1, September 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved.
8, make sure the Differential / Single Ended
CA0915
841X/881X
E-mail: service@icpdas.com
15