ICP DAS USA I-8014W User Manual page 45

The demo program on MiniOS7
The following figure shows the interface and parameters that should be set in
Magic.exe on MiniOS7.
.
After complete setting of the Magic Scan parameters, press any key to start Magic
Scan as below:
I-8014W API User Manual, v1.0.1, June 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Step1. Input total scan
channel count.
(Form 1 to 16)
Step2. Set channel number and
input range for the channel.
The order of channel number
inputted determines the scan
order.
Step3. Input sampling rate.
Step4. Input the scan mode.
Step5. Select the trigger
method.
Step6. Set the trigger
condition if external trigger
is selected in stap5.
The used parameters
list
45