Trigger Method; Software Trigger Method - ICP DAS USA I-8014W User Manual

Trigger method

This section contains:

Software trigger method, page 39

Internal hardware trigger method, page 40

External hardware trigger method, page 41

Software trigger method

The API provides a trigger instruction to start Magic Scan. If you have two or more
modules, you need to configure the Magic Scan parameters to each module and
execute the Magic Scan instruction to the modules one by one.
Start Magic Scan from one module to next by software
instruction.
I-8014W API User Manual, v1.0.1, June 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
39