ICP DAS USA I-8014W User Manual page 24

To verify the calibration
Step1. Make the calibration source output a voltage to channel 0 of I-8014W.
For example, -2V,
Step2. In the same console of calibration program, enter t (Read calibrated AI value
of Ch0) and select the input type which is just calibrated (ex. 0, -10 V ~10V ).
Step3. Confirm the data read from channel 0.
I-8014W API User Manual, v 1.0.1, September 2011 E-mail: service@icpdas.com
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved.
24