ICP DAS USA I-8014W User Manual page 47

The demo program on Windows platform
The following figure shows the interface and parameters need be set in Magic.exe on
Windows platform.
Step1. Select slot and input scan channel count. (From 1 to 16)
Step2. Select trigger source and input sampling rate.
If external trigger source is selected, select trigger state.
Step6. Click the "Start Magic Scan" tag, and press Start Magic Scan.
The data and scan order shows in the right pane.
I-8014W API User Manual, v1.0.1, June 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Step3. Select scan mode.
Step4. Select the channel scan order and
input type for each channel.
Step5: Press the "Setting" button.
47