ICP DAS USA I-8014W User Manual page 71

Parameter
slot: 0 ~ 7
chArr[]: an array for setting the channel to scan. The channel indices define the
scan order; the maximum channel number is 16.
gainArr[]: an array for setting the input type for the corresponding channel with
the same index in chArr[].
0: +/-10 V, 1: +/-5 V, 2: +/-2.5 V, 3: +/-1.25 V, 4: +/-20 mA
scanChCount: the count of channels which are added in chArr[]
sampleRate: total sampling rate，2 ~ 250 kHz
scanMode:
1: standard mode
2: virtual sample and hold mode
triggerSource:
0: software trigger
1: internal hardware trigger
2: external hardware trigger
triggerState:
0: rising edge trigger, it is valid only for external hardware trigger.
1: falling edge trigger, it is valid only for external hardware trigger.
*realSampleRate:
Return
None
I-8014W API User Manual, v1.0.1, June 2011
Copyright © 2011 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
[Output] the real sampling rate that the I-8014W used
71