Low Power Timer - Kyocera FS-1128MFP Operation Manual

Default Setting (System Menu)
Timer Setting:
1
Err. Clear Timer
*********************
2
Sleep Timer
3
PanelReset Timer
PanelReset Timer:D b

Low Power Timer

You can specify the amount of time to wait before Low Power Mode.
Specify a value from 1 - 240 minutes (1 minute increments). The default setting is 2 minutes.
For more information on Low Power Mode, refer to Auto Low Power Mode on page 3-4.
Use the procedure below to set the Low Power Mode.
Sys. Menu/Count.:a b
4 User/Job Account
5 User Property
6
********************* Common Settings
Common Settings: a b
1
Language
*********************
2
Default Screen
3
Sound
8-108
a b
[ Exit ]
(5 - 495)
******90*sec.
[ Exit ]
[ Exit ]
4
The Timer Settings menu appears.
5
Press the or
Timer].
6
Press the OK key. Panel Reset Timer appears.
7
Press the or key to set the Panel Reset Timer.
Set the amount of time before resetting the
message display on the panel in seconds. You
cannot use the numeric keys to enter this value.
8
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
key to select [Panel Reset
OPERATION GUIDE
or