Recording Waveforms; Timed Recordings - Dräger Infinity Series User Manual

Recording Waveforms

To print real-time monitoring data, two types of recordings are
available:

Timed Recordings.

!
Continuous Recordings.
!
For both recording types, the recording speed is 25 mm/s.
Timed and continuous recordings include up to two waveforms.
If one of the waveforms is hidden by a menu, you can still request
a recording. If a cascaded waveform is displayed, only the wave-
form from the first channel prints out.
NOTE: Timed and continuous recordings cannot be started while
the Alarm Limits table, trends or diagnostic logs are displayed. To
start recording, exit those displays before requesting a recording.

Timed Recordings

Timed Recordings print a total of 20 seconds of patient data, of
which about 10 seconds occurred prior to the recording request
(Delay), and about 10 seconds after the recording request.
If no recorder/printer is available, the monitor stores the record-
ing (see Stored Recordings, below). You can cancel the storage
within 5 seconds of the initial recording request.
The monitor cancels a timed recording if you modify the display,
size or scale of a waveform while the recording is ongoing.
STEPS: Starting a Timed Recording
1. Press the monitor's
2. To cancel the recording, press the
Stop
VF4
Record
key on the recorder while printing is in progress.
Infinity Gamma Series
Recordings
fixed key.
key again or the
Record
Page 7-7