Adjustment - Optex SC-U1 Operation Manual

7

Adjustment

Adjustment
The measurement values can be adjusted and displayed according to usage.
In addition, the measurement values can be adjusted and displayed according to the
environment where used.
The following adjustment items can be used.
• Pressing
• Available adjustment items depend on a sensor. For details, refer to each
sensor's instruction manual.
• For 4-20 mA output ("4-20 mA setting (4-20 mA output item setting)" P.32) and
Caution
alarm output ("Alarm output setting" P.40), the adjusted values are applied.
• When a display item is changed, the values set on "Offset Adjustment", "Span
Adjustment" and "2-Point Adjustment" for which the display items have been set
return to the factory default values.
Set again if necessary.
Item
Offset Offset coefficient to add to a
Adjustment measurement value can be set.
The measurement value can be
displayed with offset-adjusted to any
display value.
Span Span coefficient for a measurement value
Adjustment can be set. The measurement value can
be displayed with span-adjusted to any
display value.
automatically retains the measurement value.
Description Refer to
P.65
Display value
after offset
adjustment
Measurement
value
Display value Sensor's
after span
instruction
adjustment
manual
Measurement
value
63