Table of Contents
Advertisement
10
Firmware Update
The firmware of the SC-U1 can be updated from a computer using the configuration software
for Windows.
The configuration software and firmware update files can be downloaded from the following.
Also for instructions on updating the firmware, refer to the following website.
https://www.optex.co.jp/support/download-water-quality-measurement/transmitter/scu1.html
To update the firmware, connect the SC-U1 and the PC to which the configuration software
has been downloaded with a USB cable.
• The product does not include a USB cable. Use a commercial cable.
The connector type is micro USB Type-B.
• Measurement and output cannot be performed while the product is connected to a
computer.
• While being connected to a USB, "USB" is displayed on the display.
• Do not unplug the USB cable while the firmware is being updated.
Caution
Unplugging the cable during the update may prevent SC-U1 from booting.
* Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries.
* Windows stands for Microsoft Windows operating system.
79
Advertisement
Table of Contents
