Ma Setting (4-20 Ma Output Item Setting); Output Item Select - Optex SC-U1 Operation Manual

4-20 mA setting (4-20 mA output item setting)

uOutput Item Select
Select an item to output by 4-20 mA signal.
When the item on "Display Item" P.22 is changed, the output item of the 4-20 mA
Caution
setting channel for which the display item has been set turns OFF.
Set again if necessary.
On the channel selection display, switch
1
between pages using
channel to set using
The setting item selection menu is displayed and the
current setting of the selected channel is displayed.
2
Select [Output Item Select] using
and press
A list of output items is displayed.
The measurement item set on "Display Item"
P.22 can be selected as the output item.
Available display items depend on an installed
sensor.
3
Switch between pages using
select an item to output using
and press
If output is unnecessary, select [OFF]
and press
The indication returns to the setting item
selection menu.
To proceed, go to step 2 of "Signal output
range lower limit" P.33.
32
, select a
, and press
.
.
.
.
Sensor channel
,
,
,
Sensor channel
Output item
Output Sensor
item model