Cleaning Output Setting - Optex SC-U1 Operation Manual

uCleaning output setting
Set the cleaning device to operate with relay output.
To select the cleaning output as a relay output item, refer to the following sections
before configuring the setting.
• "Cleaning Interval (Relay)" P.76
Caution
• "Cleaning Activation" P.77
• "Post-cleaning Standby" P.78
After setting, the cleaning output can be selected as an output item of the relay.
On the channel selection display, switch
1
between pages using
channel to set using
The setting item selection menu is displayed and the
current setting of the selected channel is displayed.
2
Select [Output Item] using
and press
The current setting value is displayed.
3
Switch between pages using
select [Cleaning] of a sensor channel to set
cleaning output using
If output is unnecessary, select [OFF]
and press
Available display items depend on an installed sensor.
The set sensor channel and [Cleaning] are displayed
in [Output Item].
, select a
, and press
.
, and press
.
.
,
,
.
Output item
Sensor channel
Output Sensor
item model
Sensor channel
47