Maintenance Setting; Maintenance - Optex SC-U1 Operation Manual

8

Maintenance Setting

Maintenance

Set the sensor maintenance settings.
Pressing
Caution
1
Press .
The sensor selection display is displayed.
2
Select a sensor to set using
and press
By selecting [ALL], all of the installed sensors
can be selected.
The maintenance menu is displayed.
Available display items depend on a sensor.
Selecting [ALL] displays [HOLD] only.
Item
HOLD/HOLD
CANCEL
HOLD Timer Set the time period to hold the measurement value.
Maintenance
Timer
Sens. Cap
Replacement
66
automatically retains the measurement value.
.
The last measurement value is retained (held). This is
used for sensor maintenance and cleaning.
Set a maintenance cycle.
Notification can be done using a relay output when the set
cycle has elapsed ("Maintenance output setting" P.46).
Set a replacement cycle for the sensor cap.
Notification can be done using a relay output when the set
cycle has elapsed.
,
Description
Output Sensor
item model
Sensor channel
Refer to
P.67
P.69
P.70
Sensor's
instruction
manual